产品导航

条码打印机

条码扫描器

数据采集器

条码检测仪

条码标签

条码碳带

维修配件

POS 机

RFID标签

RFID设备

条码编辑软件

防盗标签

防盗系统

联系我们

电话：+86-21-62200392/60910636
传真：+86-21-60910636
邮箱：hongmei.hu@tec-sun.com.cn
网址：http://www.tec-sun.com.cn
地址：上海市嘉定区张掖路333号瑞尔大厦9层

首页 > 产品展示 > MINIHAWK嵌入式条码扫描器

MINIHAWK嵌入式条码扫描器

产品名称：MINIHAWK嵌入式条码扫描器

产品编号：MINIHAWK嵌入式条码扫描器

详细说明：

Mini Imagers for Direct Part Marks

　　MINI Hawk imagers pack aggressive direct part mark (DPM) reading algorithms into a miniature imager that is both powerful and easy to use for barcode and 2D track, trace and control applications. Aggressive decoding is ensured through X-Mode technology, which reads damaged or diffi cult symbols with no confi guration or setup required.

　　With high speed and high resolution confi gurations available, there is a MINI Hawk imager to solve virtually any challenging application.

Decode Any Symbol

　　The MINI Hawk consistently reads damamged, distorted or otherwise challenging direct part marks with our patented decode algorithms.

Autofocus

　　For real time dynamic autofocus, position the symbol at the center of the field of view, and push the EZ button. The MINI Hawk automatically adjusts focal distance and sets internal parameters to optimize the symbol.

Wide Field of View

　　Read symbols as large as 2” (50.8 mm) square as close as 1” (25.4 mm) with diffractive fi eld illumination and optional right angle mirror.

X–Mode Technology

　　In addition to the most aggressive decoding available, X-Mode technology provides easy setup and deployment of the MINI Hawk in any application.

Compact and Lightweight

　　Miniature form factor fits easily in tight spaces, and is lightweight for mounting into robotic applications.

Application Examples

Automotive
• Dot peen mark on powertrain components
• Laser marks on automotive electronics components Medical Devices
• Laser marks on components Electronics
• Laser markings on printed circuits boards, fl ex circuits Semiconductors
• Laser marks on packages and components

MINI Hawk Series: At a Glance

• Decode speed and read range: Varies by model
• X-Mode Decoding Technology
• Autofocus
• Optional USB Connectivity

MINI HAWK HR: High resolution imager
MINI HAWK HS: High speed imager

MINI HAWK SERIES SPECIFICATIONS AND OPTIONS

MECHANICAL

Height: 1” (25.4 mm) Width: 1.80” (45.7 mm)
Depth: 2.10” (53.3 mm) Weight: 2--oz (57 g)

ENVIRONMENTAL

Enclosure: IP54 (category 2)
Humidity: up to 90% (non-condensing)
Operating Temperature: 0° to 40°C (32° to 104°F)
Storage Temperature: -50° to 75° C (-58 to 167°F)

CE MARK

EN 55024: 1998 ITE Immunity Standard
EN 55022:98 ITE Disturbances

LIGHT SOURCE

Type: High output LEDs

LIGHT COLLECTION OPTIONS

Progressive scan, square pixel. Software adjustableshutter speed, electronic shutter
MINI HAWK HR: 1280 by 1024 pixels (SXGA)
MINI HAWK HS: 752 by 480 pixels (WVGA)

SYMBOLOGY TYPES

2D Symbologies: Data Matrix, QR Code, Micro QR Code
Stacked Symbologies: PDF417, Micro PDF417,GS1 Databar (Composite & Stacked)
Linear Bar Codes: Code 39, Code 128, BC 412, I2 of 5,UPC/EAN, Codabar, Code 93

READ PARAMETERS

Pitch: ±30° Skew: ±30° Tilt: 360°
Decode Rate: Up to 60 decodes per second (HS model)
Focal Range: 1.3 to 9.3” (33 to 236 mm) (autofocus)

CONNECTOR

Type: 3 ft. cable terminated with High Density15-pin D-Sub socket connector or USB Type A connector

INDICATORS

LEDS: Read Performance, Power, Read Status

Green Flash: Good read

Blue V: Symbol locator

Beeper: Good read, match/mismatch, noread, serial command confi rmation, on/off

COMMUNICATION PROTOCOLS

Standard Interface: RS-232, RS-422, or USB

ELECTRICAL

Power: 5 VDC +/– 5 %, 200 mV p-p max. ripple,494 mA @ 5 VDC (typ.)
Optional Int.: 10-28 V Accessory

DISCRETE I/O

Trigger Input: 5 to 28 VDC rated (.16 mA)
New Master: 5 to 28 VDC rated (.16 mA)
Outputs (1, 2, 3): 5V TTL compatible, can sink 10 mA andsource 10mA
Optional I/O: Optoisolated (with IC-332 accessory)

SAFETY CERTIFICATIONS DESIGNED FOR

FCC, UL/cUL, CE, CB